Your position: Home > News

The Installation Requirements of the Vortex Flowmeter

2024-09-13
The Installation Requirements of the Vortex Flowmeter

The installation requirements of the vortex flowmeter are as follows:

Installation environment requirements:
Avoid installation near strong electrical equipment, high-frequency equipment, and strong switching power supply equipment.
Avoid direct influence of high-temperature heat sources and radiation sources. If installation is necessary, insulation and ventilation measures must be taken.
Avoid high-humidity environment and highly corrosive gas environment. If installation is necessary, ventilation measures must be taken.
It should be avoided as much as possible to install on pipelines with strong vibrations. If installation is necessary, pipeline fastening devices must be added at 2D upstream 
and downstream, and anti-vibration pads must be added.
The instrument is best installed indoors. When installed outdoors, attention should be paid to waterproofing, especially at the electrical interface, 
the cable should be bent into a U shape to prevent water from entering the amplifier shell along the cable.


 

share:

Pre:Thermal Mass Gas Flowmeter
Next:Back To List