Your position: Home > News

Large Size DN1200 Electromagnetic Flowmeter under production

2017-11-08
Recently our client ordered for 4pcs of DN1200 Electromagnetic flowmeter for water treatment project.
4pcs all with hard rubber liner, 4-SUS316L electrodes, and carbon steel body. Now the 4pcs body part
almost finished, our engineer also had finished the calibration on our calibration equipment DN800-DN3000.

Large size of Electromagnetic flowmeter production shows manufacturer's production ability. Now our company
can produce electromagnetic flowmeter, from DN3-DN3000. All of them will be calibrated on our test bench, with 
Gravimetric/volumetric/standard meter calibration method to make sure the good quality.

Quality first is our company's principle. Should you have any interest, pls contact with us for more information.

 



share:

Pre:Kaifeng Qingtianweiye Participated in MICONEX two key points established industry position
Next:Notification Of Company Name Change