Your position: Home > News

QTLD electromagnetic flowmeters are waiting to install the Electrical equipment

2018-09-25
   Q&T a large number of electromagnetic flowmeters are waiting to install the Electrical equipment
 

Q&T INSTRUMENT is a manufacturer of Electromagnetic Flowmeter in China.

Some notices of installtion share with you.

1. Keep QTLD electromagnetic flowmeter away from strong magnetic field equipment.
2. Avoid strong vibration and strong corrosive places.
3. The process does not allow the flow of the pipeline to be interrupted. When installing the flowmeter, 
     a shut-off valve and a bypass line should be added.
4. The upstream of the flowmeter sensor should also have a certain straight pipe section, generally in 5D~10D.
5. The measuring tube of the flowmeter sensor, the shield wire of the outer casing, the lead wire, 
and the pipe at both ends of the sensor must be reliably grounded, and must not be shared with
the grounding of other electrical equipment, which is a special installation requirement of the 
electromagnetic flowmeter.











share:

Pre:Happy Mid-autumn Festival
Next:Tri-clamp Thermal Mass Flowmeter